kvik

Forum Replies Created

Viewing 1 post (of 1 total)
  • Author
    Posts
  • in reply to: Indesit widl126 not drying but wetting #412808
    kvik
    Participant

    Re: Indesit widl126 not drying but wetting

    I’m a bit confused here where and how the condensation is happening.
    First, there is the white semi-transparent tank at the back, connecting the heater unit and the drum, while also connects the inlet water pipe to the drum. It also has a filter at the bottom right where it connecs to the drum. I cleaned this. I see fluff inside dispersed.
    Right now I’m not completely sure why it was designed like this, why is a tank, why this shape. It is always empty in my case, water flows directly down.
    Not sure how to check if air comes back.
    I was told that the condenser is in the drum, I suppose an other layer on the drum: clothes – grille – “centrifuged water collector” – separation – condenser ? As I haven’t seen it from the inside, I might imagine it wrong.
    Where exactly is the condenser?

Viewing 1 post (of 1 total)