[Laminator93]

Are there any areas that I should try and clear? I have emptied the filter at the bottom. Checked the fan. Pressed the reset button that had clearly tripped. Was literally worked 2 days ago, I just think it’s overheating and I imagine due to a build up somewhere

[Laminator93]

Are there any other simple or obvious things I have missed at all that you can think of?

[Laminator93]

This is where im probably a bit out of my depth sorry. I don’t have multimeters or any other fancy bits of equipment. I’m simply trying to use the basic things I can do to see if I can get it working again. I assume it’s cutting out because it’s overheated, but I simply don’t know. All I know is there’s no error messages and it cuts out after 15 minutes, with no heat being generated.

[Laminator93]

Apologies I’m no expert. Are you able to get explain how I check the element and if the fan runs?

[Laminator93]

So I cannot see any issues with the fan. I assume you mean the bit at the top of the black bit I have lifted? It doesn’t appear to be heating at all, even when pressing In the reset button like last time, which has worked for several months.

[Laminator93]

Just while I’m asking, does that back black fan- like item need to be taken off also to remove the metal heater box? From the looks of it, it would?

[Author]

Posts