[lateagain]

Re: JLWM1407 WILL NOT FINISH NORMAL CYCLE

Thanks for your advice, have now tried a 90degree wash and drain sequence works ok, but again problem seems to be at the end of the overall cycle. In the JL operating manual in the problem solving section it has lead me to the water inlet valves, which I have proved worked ok and blown down each pipe to prove no blockages. I have checked the inlet filter and drain filters, the pressure switch on the water level, the heating element and sensor, the drain pump connections, the main motor brushes and made sure all of the electrical plug connections are securely in. Are there any other items I could check out to solve the problem?

[lateagain]

Re: JLWM1407 WILL NOT FINISH NORMAL CYCLE

Thanks for your feedback, I will check out the heater element, but I am sure we have opened the door at some stage and found the clothes warm and during the operation found the glass front quite warm.
Here are some further observations on the situation.
30 minute cycle seems to be working OK, washes, spins and uses fabric conditioner
handwash cycle – working as 30 min cycle
60 degree wash – never takes fabric conditioner from drawer, sometimes does not spin water off (wash ends with drum full of water)
drain cycle – works
spin cycle – works
Hope this helps in your diagnostic.

[Author]

Posts