Forum Replies Created
-
Posts
-
Now it is doing something else, it did this about a week ago but the problem went away. When I power off the machine it turns back on and beeps continuously and wont stop until I hit pause or turn it off at the wall, unscrew the display panel and hold it in my hands it turns on and off no no prob, its as if ther is another button being pressed in or something. I noticed if I screw it back in and leave the middle screw out with a small gap approx 2mm the problem seems to go away. Is there perhaps something wrong with the display panel’s pcb? or would the fault be coming from the Controller Motor pcb?
Also I’m having trouble finding the part number for the pcb can you give me a clue…. thanks for you help Penguin45
I flushed it out today and also cleaned the entire bowl inside and out to be sure that there are no blockages anywhere. At the end of the cycle on the second last L.E.D it makes a beeping sound similar to when you first turn it on and both the hot and cold L.E.D’s are flashing along with the second last L.E.D closest to the SPIN L.E.D. Does this tell you anything? Or confirm anything for you? Just wanted to make sure before changing pcb.
Cheers
