Forum Replies Created
-
Posts
-
Re: Indesit IDL500 error 1st and 3rd lights
Thanks very much, I will probably end up calling a engineer, though as you say it might be a idea to get something better as its just liable to break down again.
Re: Indesit IDL500 error 1st and 3rd lights
Looks like I spoke to soon… found out that the error means this –
Indicating there is water leaked from the tub into the base.
Pull the machine out, tip it backward about 45 degrees and try it again.
Hopefully it won’t have caused any damage to the wash motor.Did this and alot of water came out, put the machine back on and we are back to the 1st and 3rd error codes again.
Re: Indesit IDL500 error 1st light flashes
Looks like I sorted that error by stripping everything out and giving it all a very good clear, but now I think its telling me its not pumping water in. As the machine runs, sounding like its drawing in water but never seems to. First light flashes the whole time its doing this until I turn it off.
Re: IDL 500 UK2 – Error first and second lights
Thanks for the advice, I’m looking to move house next month to might leave it till then, as there will be a garage so I can get it done outside.
Re: IDL 500 UK2 – Error first and second lights
Good point, I will have to take the back off and have a look. Can anyone direct me to some manuals maybe for this model?
Re: IDL 500 UK2 – Error first and second lights
Spoke to soon, its not pumping the water away, so new pump needed I think.
Re: IDL 500 UK2 – Error first and second lights
Thanks, based on the fact that it would not drain I pulled all the pipe out and found the u-bend on the drain was lime-scale city. So pulled it all off and cleaned it all out, thanks for your help.
