Lucas

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 11, 2009 at 9:53 pm in reply to: ADP8352 Diplomat dishwasher #255844
    Lucas
    Participant

    Cleaned the valve and managed to get a cycle to start and water to enter the machine. Worked for about 10 minutes then multiple beeping and the two program lights on the very left flash like before.

    Any ideas? What is the pcb?

    Many thanks

    January 10, 2009 at 10:49 pm in reply to: ADP8352 Diplomat dishwasher #255843
    Lucas
    Participant

    Hi Penguin.

    The fill hose to the machine is working fine and the valve filter did not look blocked.

    The machine is only a year old but in a hard water area. I will investigate further.

    Thanks again.

    January 10, 2009 at 12:24 pm in reply to: ADP8352 Diplomat dishwasher #255841
    Lucas
    Participant

    Re: ADP8352 Diplomat dishwasher

    Forgot to mention that there is water entering the dishwasher but just not enough i guess.

    Many thanks

    January 10, 2009 at 12:17 pm in reply to: ADP8352 Diplomat dishwasher #255840
    Lucas
    Participant

    Re: ADP8352 Diplomat dishwasher

    Penguin45 wrote:No fill detected in the time allowed.

    Check that water is on and that fill hose is not trapped, nipped or kink. Possible that valve has failed, or that the pcb is not actually switching it on.

    Penguin45.

    Hi I have the same problem and have checked the water and fill hose, they are fine. Is there a way to test the valve and/or pcb?

    Thanks for your help. Great forum.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)