[Lydixa]

The machine stopped working, it had power from the mains but it was dead, no sound or light on the front panel display. I replaced the touch control board with a new one and the machine was running again but now the knob/selector switch is out of sync with the display. This was never an issue before. I tried reconnecting the wire several times, tried switching off from mains and adjusting the knob but regardless of what I do the machine is always ON when the knob is in OFF position. Even if I disconnect the switch wire whilst the machine is on and reposition the knob to the mode shown on the display – As soon as I reconnect the switch wire, it changes to an incorrect mode.

The only diference between now and then is the new touch control board. I think the control board is misreading the switch selector, whether that be resistance or some kind of encoded signal idk.

Is it safe to say the touch control board is slighty faulty or am I overlooking something?

[Lydixa]

electrofix wrote:wow swinging on price a bit

part no 41036616

https://shop.ukwhitegoods.co.uk/41036616-16-position-program-selector-switch

main pcb part no should have been 49033074

Dave

I don’t follow.
The control module pcb board part number that I have is 41043318
The selector switch connects to this control module board with 2 wire plug.

Problem is the the mode selected using the knob switch does not relate to the mode shown on the LED display.

Do you know what may cause such a problem?

[Lydixa]

electrofix wrote:to be able to get a part number for the control board i would need the model and complete serial no

Dave

Candy GV 168T3W/1-80
#31006789
https://www.espares.co.uk/product/es1741945/washing-machine-selector-16-settings-150185-b

[Author]

Posts