Forum Replies Created
-
Posts
-
Re: Diplomat ADP8101/2 In progress light on and wont start
pandyuser
I appear to have the same fault, it can take over 45mins to fill. I have not got a manual as it was in when we moved house, and no manual.
Could you please oblige by copying the page that deals with removing the plastic plate at the bottom of the inside cabinet. I have undone the two screws and taken out the small plastic net basket, BUT despite releasing the clip and the top clips from the long tube down the back of the cabinet to the centre of the base plastic I cannot get the drain filters out. In the centre of the plastic plate there is the holder for the bottom spray bar which I have taken off. Then there is a grey coloured surround, I could not lift that, wondering if there was another two screws underneath it.
If you can help with the manual, anyway, either posting as an attachment
or I will send prepaid, plus your costs of copying I would be grateful
ThanksRe: Electrolux premier Fan oven
Penguin45
Thanks so much for an unbelievably quick reply.
Do you mean the main oven knob first left. The ON and temp. setting OR are you telling me the oven stat clipped to the backplate which I removed to take out the element, controls the fan as well as the ele. and the fan is wired to the control knob.
The element has definitely blown as it is open circuit on the meter.
I had a vision of connecting the new ele and then blowing that, if the wiring to the element also switches the fan.
Thanks again
Macboatmaster
