macleesh

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Bosch WVT1260 Washer Dryer motor check #361938
    macleesh
    Participant

    Re: Bosch WVT1260 Washer Dryer motor check

    OK, just had another look and now have machine working.
    Schoolboy error 😳 when I split the motor to clean the commutator I wasn’t careful enough about making sure the connectors for the field windings were aligned on re-assembly.

    Machine is now happily doing a series of empty runs to bed the new brushes in.

    Thanks

    in reply to: Bosch WVT1260 Washer Dryer motor check #361936
    macleesh
    Participant

    Re: Bosch WVT1260 Washer Dryer motor check

    Which terminals are which on the block?
    If it is the TOC as I understand it that means a new motor?

    in reply to: Candy AQW130 Washer/Dryer, poor drying #159593
    macleesh
    Participant

    Re: Candy AQW130 Washer/Dryer, poor drying

    Thanks Dave,

    Order placed.

    Sean

    in reply to: Candy AQW130 Washer/Dryer, poor drying #159591
    macleesh
    Participant

    Re: Candy AQW130 Washer/Dryer, poor drying

    Dave,

    The full code is 37616562 0346 9352
    The Model Name is Aquaviva 1300.

    You are quite right to warn others about live testing, if you haven’t been trained in safe working practices it’s best left to those that have.

    Thanks

    Sean

    in reply to: Candy AQW130 Washer/Dryer, poor drying #159589
    macleesh
    Participant

    Re: Candy AQW130 Washer/Dryer, poor drying

    OK I’ve tested it and seem to have proved the valve faulty.
    Removing the hose and the spray nozzle and inserting them into a temporary container no water was emitted when test running the machine.
    A meter indicated that 240V was present across the terminals of the valve during the test so it would seem to be an open (or rather not) and shut case of a faulty valve would it not?

    Are the universal ones in your on line shop appropriate for this model ? if so I’ll buy one.

    Regards

    Sean

    in reply to: Leaky Whirlpool ADP 962 #159530
    macleesh
    Participant

    Re: Leaky Whirlpool ADP 962

    Dave,

    Product code is 8542 962 15010, serial no. 33 9711 017885

    Thanks

    Sean

Viewing 6 posts - 1 through 6 (of 6 total)