[maddie]

Re: hotpoint wmud 960

Sorry about model number the correct one is wmud962.Well i sent main modules back my original and the one that was sent to me.They said they could not find any faults but sent a different replacement to try. I tried new one and hey presto its all working.Thank you everyone for all your advice and input

[maddie]

Re: hotpoint wmud 960

i have spoke to company i got module off and they have advised i send both back.my original one and the replacement sent.i will keep you posted on what happens next.Thanks for all the reply s

[maddie]

Re: hotpoint wmud 960

i thought this anyway i put my old module back in and pump starts to drain with out cutting out.but still not filling with water.so i opened door filled by hand till far as i could closed door and tried to start a wash wash.surprise water started coming in from inlet valve to about just under half way on glass door and motor turning.i drained and went through same motions so i suspect i have a faulty pressure switch.i have blown down pipe all seems clear but have ordered new switch.

[maddie]

Re: BEKO 1512 S

Thanks Mike
I will check the filter and see what comes out of it.

[Author]

Posts