majorpdd

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Hotpoint Creda SPC61 timer sound not working… #425469
    majorpdd
    Participant

    Re: Hotpoint Creda SPC61 timer sound not working…

    iadom wrote:Fault can only be in the timer unit, around £75.00. 🙁

    Noooo…. A seperate timer on the side it is then lol

    in reply to: Hotpoint Creda SPC61 Main Oven … #217881
    majorpdd
    Participant

    Re: Hotpoint Creda SPC61 Main Oven …

    Now that is wicked…

    Just logged in after a few years to find my post still here.

    Believe it or not i have exactly the same problem (top oven comes in handy) and totally forgot I replaced it already 🙂

    Thanks UKWHITEGOODS you have saved my bacon once again 🙂

    Top job you guys do here 🙂

    in reply to: Hotpoint Aquariuos WMF540 – Grinding #373074
    majorpdd
    Participant

    Re: Hotpoint Aquariuos WMF540 – Grinding

    Do you think that’s what it could be though?

    in reply to: Hotpoint Aquariuos WMF540 – Grinding #373073
    majorpdd
    Participant

    Re: Hotpoint Aquariuos WMF540 – Grinding

    The machine must be under 5 years old, I will have a look for the receipt when I get home.

    What do I do from there?

    Will it still need to be repaired by qualified person?

    Thanks

    in reply to: Hotpoint Creda SPC61 Main Oven … #217880
    majorpdd
    Participant

    Re: Hotpoint Creda SPC61 Main Oven …

    I appreciate your help verv much.

    I will order first thing tomorrow.

    Thanks again.

    What are your thoughts to the bubbling.

    Dave:)

    in reply to: Hoover WA110 Performa 1100 #188085
    majorpdd
    Participant

    Re: Hoover WA110 Performa 1100

    I know its a bit late, but thanks for all your help in this matter.

    Kind Regards

    Dave

    in reply to: Hotpoint Creda SPC61 Main Oven … #217878
    majorpdd
    Participant

    Re: Hotpoint Creda SPC61 Main Oven …

    I have stripped out the fan element and have found that there are no splits that i can see. I have however noticed some bubbling. And at one point the element crosses over and touches itself, I cannot see any problems at this point but would this create a hotspot?

    Images

    http://www.cbirch.plus.com/cooker/element1.jpg
    http://www.cbirch.plus.com/cooker/element2.jpg

    I have contacted spares direct and they say that there are 2 replacement elements for this. 6102752 which is a 2kw and 6204370 which is a 2.5kw.

    Here are some of the markings on the element.

    ?C2???? 2500W 240V 12 0 4 “bs sign” B16171 970110060

    Cant seem to make out the ? characters.

    Looking at the marking i would assume that the element is a 2.5kw version P/N 6204370.

    I have also added some pics of the rear of the cooker, could you please confirm that this is general use.

    http://www.cbirch.plus.com/cooker/cooker1.jpg
    http://www.cbirch.plus.com/cooker/cooker2.jpg

    The cooker is about 2 years old

    Please could you help and confirm details.

    Thanks in advance

    Dave

    in reply to: Hoover WA110 Performa 1100 #188083
    majorpdd
    Participant

    Re: Hoover WA110 Performa 1100

    ok, so could it be…. or could you confirm that IT IS the fan on the dryer ???

    This makes no noise at all when washing only when drying.

    Although i just tried the dryer since i havent used it it for a while and it was ok for a minute or 2, then it just starting making a rubbing grinding noise, then stopped then started again.

    Horrible

    Where could i get the part from??

    Kind Regards

    in reply to: Hoover WA110 Performa 1100 #188081
    majorpdd
    Participant

    Re: Hoover WA110 Performa 1100

    Thanks for your speedy reply.

    Washing seems to be perfect, only when drying?

    Would the fan make the thurmostate trip because i have already puched the switch once. then this noise happened.

    Thanks Again

Viewing 9 posts - 1 through 9 (of 9 total)