mark224

Forum Replies Created

Viewing 8 posts - 16 through 23 (of 23 total)
1 2
  • Author
    Posts
  • April 4, 2007 at 8:42 am in reply to: Bosch WFL2260 leaking #209844
    mark224
    Participant

    Re: Bosch WFL2260 leaking

    Sorry for being thick, but it there a trick to getting off the gasket? It’s firmly attached and I can’t see any fixings except for the door hinge/lock. Do I have to do this from inside?

    ( I have removed the large spring clip around the seal)

    Cheers,
    Mark

    April 1, 2007 at 1:43 pm in reply to: Bosch WFL2260 shaking on spin #209445
    mark224
    Participant

    Re: Bosch WFL2260 shaking on spin

    Thanks for the reply. I will check out brushes.

    If they are OK then is there an easy way to test the suspension legs? They are rather expensive to speculatively replace.

    BTW: I ran the machine empty and there was no problem with the spin. Maybe SWMBO has been overloading it? 😉

    Cheers,
    Mark

    April 1, 2007 at 12:38 pm in reply to: Bosch WFL2260 shaking on spin #209443
    mark224
    Participant

    Re: Bosch WFL2260 shaking on spin

    Thanks for the response.

    Penguin45 wrote:I’d start by checking that the filter is clear, and any sink coupling…….

    The drain pump is clear and the outlet is not blocked. I don’t quite understand why these could affect the spin though.

    Mark

    March 25, 2007 at 4:50 pm in reply to: Bosch SKT 2022 does not wash #208874
    mark224
    Participant

    Re: Bosch SKT 2022 does not wash

    Thanks for the info :-). I now understand why it drains but not washes.
    Regards,
    Mark

    March 25, 2007 at 4:25 pm in reply to: Bosch SKT 2022 does not wash #208872
    mark224
    Participant

    Re: Bosch SKT 2022 does not wash

    Thanks for the help to all who responded.
    Penguin45: Do you know what p/n 065553 is for?

    March 25, 2007 at 2:55 pm in reply to: Bosch SKT 2022 does not wash #208870
    mark224
    Participant

    Re: Bosch SKT 2022 does not wash

    Martin wrote:
    If there is water in the tub whilst the circulating pump is ‘spinning’ then it should work. What may have happened is that the drive shaft to the impellor has rusted and broken? Is there signs of leakage under the motor?

    A small amount of water gradually collects in the tub during the first 5-10 minutes. It rapidly drains away later. The pump is spinning.

    There’s no sign of leakage under the unit.

    I must get around to buying some Torx bits – I’ve been meaning to for ages 😉

    March 25, 2007 at 1:34 pm in reply to: Bosch SKT 2022 does not wash #208867
    mark224
    Participant

    Re: Bosch SKT 2022 does not wash

    I’ve removed the cover and run the short programme. I can see that the circulating pump is spinning, but the machine is still not working. There is also a reservior which is filling prior to the pump starting. From the parts diagrams it is not obvious to me what bit does what.

    I don’t have any torx screwdriver bits so I can’t remove the pump.

    March 25, 2007 at 10:23 am in reply to: Bosch SKT 2022 does not wash #208866
    mark224
    Participant

    Re: Bosch SKT 2022 does not wash

    gegsy wrote:Hi
    Its possible that the wash pump has seized or jammed in someway.
    With the applianced unplugged, you will need to re move that pump and check for free movement and debris.
    Greg

    Thanks greg for the response. I’ll see if I can find the pump! 🙂

    Regards,
    Mark

  • Author
    Posts
Viewing 8 posts - 16 through 23 (of 23 total)
1 2