Forum Replies Created
-
Posts
-
Re: Bosch D/W no heat?
start a cycle and measure the power from pcb to element. If no 240 coming through its board.Have you ever taken apart a heat pump? Its a metal tube with “printed” element path on it. Usually dishwasher and wm heating elements are max few hundred ohms.
Re: LG Washer Dryer F1403RD6
Done a lot of these as insurance jobs,electronics, bearings, drain pumps, heating elements. PCB i reckon but the question is what caused it. I guess you have checked the fuse 🙂 and for short circuit.
Re: Siemens Integrated dishwasher anti flood
I had quite a few of BSH’s sump seal especially at the back of it.Some new sumps come with a plastic pin sticking out there which on certain models you have to cut off.I found some manufactured that monday job way (they forgot to cut).
Re: Samsung DV80H8100HW
Lawrence wrote:Then it requires PCB’s but like I says before beware the compressor as well
Thanks, replaced pcb and fan after as i said tested the compressor well with all my tools :).Works like a charm!
Re: Samsung DV80H8100HW
I have tried to do whats in the description, but it wont go into test mode.I have tried few different ways but nothing.
Re: Samsung DV80H8100HW
Even if the compressor would be dead, i could replace it it just a matter of hard soldering and getting the compressor from china (you can buy anything on alibaba):) Oh and also an F-gas certificate to buy R134a 🙂
Re: Samsung DV80H8100HW
Thanks Lawrence i will do that. Te comp is not knackered as i have tested it.I fix fridges and replace compressors so i know too much about them 🙂 .
For example if i have to replace one i have the best tool to do it.
Rothenberger Rotherm 2000 .
