Forum Replies Created
-
Posts
-
Re: Cruisader/Creda CT61C problems running and thermister sp
Hmm, Did not think asking for the position of 6 or so wires on a timer would constitue a breach in copyright to be honest thats a little absurd as we all remove the items.
You specified that I probably broke the green thermostats my self , which i already guessed However you did not specify whether you had seen the fault before or could diagnose it further for me as it seems a little bizzare.
All help appreciated
Re: Cruisader/Creda CT61C problems running and thermister sp
I already changed the relay and this made no differance to the machine running and reliability. I found one thermister under the doorway entrance removed it and tested it with a kettle to check that it broke circuit it did this fine. Once it was placed the whole system ran for 15s. Then failed. I removed it again and got 4 mins. It failed after and i looked to the back and took out the two at the rear to document them.
They were :
36FXE14 20102 L130C S0228
36txe11 14288 l106-20c s0220
and on the doorway entrance
36txe11 14164 L78-10C s0217Unfortunatly i pressed the green dot sensor the 36FXE14 and it popped and failed or at least i think i broke it but was wondering if i hadnt could this have caused the start up fault.
Its also odd that the timer has stopped I have had the wires off and it is possible they are wrong does anyone have a diag please
