[mhrussell]

Re: Prima LPR600/1 Error code 6

Andy,

just wanterd to say a big thanks. The Solenoid has been replaced, and the LPR600/1 has just completed its first wash in several weeks!

Keep up the good work,

Martin

[mhrussell]

Re: Prima LPR600/1 Error code 6

Thanks for your help Andy. A new solenoid is ordered and will soon be replaced…..

Cheers,

mhr

[mhrussell]

Re: Prima LPR600/1 Error code 6

This is the first time I have ever used a multi meter…….

I have tried the multimeter on the 20k Ohms settings as you suggested. I removed the connector block and placed the leads of the multimeter on the two electrical connector points of the inlet valve (where the wires would fix to).

The meter had a reading of 1 . (before I touched the contacts with the leads), and stayed at 1 . when I made the connections with the multimeter.

I hope that I have carried out the test correctly!

I tried the same test on some of the other components, and found the DMM gave out a different reading upon connection of the leads…………

Cheers,

mhr

[mhrussell]

Re: Prima LPR600/1 Error code 6

Hi,

Hi Specialist,

I have ordered a multimeter from ebay, so will have an answer to your question over the weekend……..

Cheers,

mhr

[mhrussell]

Re: Prima LPR600/1 Error code 6

I can hear the workings of the machine…….not convinced about water flow though!

I have removed the water chamber on the side of the machine to replace the reed switch…… The machine is NOT putting any water into the tank before it cuts out and starts beeping/flashing. Hence my inlet valve theory.

Any help is really appreciated!

Cheers,
mhr

[mhrussell]

Re: Prima LPR600/1 Error code 6

Thanks for the post.

So the issue might actually be the inlet valve then……..no water flowing through the system, hence error 6…..flow meter not detecting water flow?

Cheers,

mhr

[Author]

Posts