[Michael151]

Re: Bosch SGS45E02GB/45

Hi All,
I’ve just replaced the flow rate meter and have exactly the same symptoms as before. The dishwasher partially fills and then partially empties. The water level inside the machine is just below the coarse food filter (i.e. it looks empty) and not just below the salt filler cap. The water matrix and pressure chamber look clean and water is flowing in through the hose at bottom right of the float chamber. There is no sign of water backing up, indicating a blockage. The LED display does not countdown. For some reason, on Economy the LED displays 199 minutes (and should be circa 156) but on Auto it is correct at 130. It is also correct on Quickwash and Pre-Rinse. I wonder if anyone has any further ideas? (At least the flow meter was only £13.) Regards, Michael.

[Michael151]

Re: Bosch SGS45E02gb/45

Hi,
I’ve now checked the heater and it’s reading 23+ Ohms, which I believe is acceptable. Since reassembling the control module, the machine’s behaviour has changed. On both Pre-Wash and Quick Wash, it’s not counting down. I’ve looked at the water chamber and water is flowing through. The float valve in the pressure chamber and at the top of the water chamber both seem to work. The machine is intermittently pumping water into my bucket in a continuous cycle. At first the water was quite cloudy but is now running clear. Any further suggestions would be appreciated. Regards, Michael151.

[Author]

Posts