michaelnaylor1983

Forum Replies Created

Viewing 6 posts - 16 through 21 (of 21 total)
1 2
  • Author
    Posts
  • May 30, 2018 at 7:48 am in reply to: Siemens WT46E381GB/46 Door switch #456083
    michaelnaylor1983
    Participant

    Re: Siemens WT46E381GB/46 Door switch

    Thanks eastlmark. I saw that and thought it just held the door shut. Looking closer I think I can see a place for a small plug!

    Thanks again…

    May 26, 2018 at 11:35 am in reply to: BEKO WMB91442LW 7110841400 #456059
    michaelnaylor1983
    Participant

    Re: BEKO WMB91442LW 7110841400

    We have had that fault a couple of times. Once it was a motor fault and the other time it was a broken wire on the motor plug.

    Mick.

    May 13, 2018 at 11:55 am in reply to: Samsung RSH1DBRS part? #455875
    michaelnaylor1983
    Participant

    Re: Samsung RSH1DBRS part?

    Excellent thank you!

    May 8, 2018 at 2:12 pm in reply to: AEG 5212bu Hinges #455805
    michaelnaylor1983
    Participant

    Re: AEG 5212bu Hinges

    Thanks Don

    No, not looking good but the Electrolux part number may help!

    Thank you.

    May 5, 2018 at 12:39 pm in reply to: Flavel FC7030FAPC fridge freezer #455768
    michaelnaylor1983
    Participant

    Re: Flavel FC7030FAPC fridge freezer

    Hi,
    do you get a click from the relay on the compressor? If so, compressor fault (normally cuts off before 10 seconds though)
    If not, I have changed many boards on these for many different faults. The boards are nice and cheep.

    October 30, 2017 at 9:23 pm in reply to: smeg double oven. Mod SY62MX8 #451490
    michaelnaylor1983
    Participant

    Re: smeg double oven. Mod SY62MX8

    Hi,
    The hinge “arms” have to be extended as if they were still in the oven and the door fully opened. The pins stop the springs from pulling the arms towards the top of the door. Hope that makes sense. It’s hard to explain.

  • Author
    Posts
Viewing 6 posts - 16 through 21 (of 21 total)
1 2