[mike100]

Re: creda C361E clock not comig on

ok thanks Dave will look for stat
Mike

[mike100]

Re: aeg competence B4140-1 door hinges

Thanks Chris have ordered from Qualtex
Mike

[mike100]

Re: john lewis washer flashing

do you know how to access diagnostics on this model

[mike100]

Re: miele g611sc base filling up

thanks Dave. have replaced door seal and cleaned out door base.
best
Mike

[mike100]

Re: aw23 water valve

Thanks for that Jim.
Mike

[mike100]

Re: aeg tumble dryer no display 916096397/04

ok thanks Dave. As I thought £ 270 for part so not worth it.
Mike

[mike100]

Re: miele w916 tap light coming on—still

great will try that.
thanks
Mike

[mike100]

Re: miele w916 tap light coming on

Thanks for that Mark. Will try the hose first.
regards,
Mike

[mike100]

Re: New World selector switch

That’s the right one Dave 4202900000

How did you get that as I had to special order the other bit via Qualtex which turned out to be wrong.
The annoying part is that 082506094 is a stock item with them.
cheers,
Mike

[mike100]

Re: Miele G1270 scvi circ. pump motor seal

thanks clayside, will get back to Miele
regards,
Mike

[mike100]

Re: Miele G1270 scvi circ. pump motor seal

no unfortunately not Don. It is the small seal that the motor shaft goes through
Mike

[mike100]

Re: neff B1542N0GB/01 oven knob fitting

ok, thanks Martin. I’ve got 163281 so will retry
Mike

[mike100]

Re: Bosch tumble dryer relay for—WTA 3003gb/17

great, thanks Martin
Mike

[mike100]

Re: bosch wvd24520gb/08 start light on but not flashing

thanks Paul, you were right—child lock
regards,
Mike

[mike100]

Re: Miele W1713 door seal

normally easy to do. Prise off kick plate to reveal 2 screws. 2 screws holding interlock then take off front panel.
Mike

[Author]

Posts