mike100

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 170 total)
  • Author
    Posts
  • in reply to: bosch wvd24520gb/08 start light on but not flashing #429021
    mike100
    Participant

    Re: bosch wvd24520gb/08 start light on but not flashing

    yes, door locks and key stops flashing.

    in reply to: Hobart CLF dishwasher #425763
    mike100
    Participant

    Re: Hobart CLF dishwasher

    Great, thanks for the response Jem. Will go back
    Mike

    in reply to: bosch sms 40a02gb/03 no water in #424404
    mike100
    Participant

    Re: bosch sms 40a02gb/03 no water in

    Thanks for that Clive. Have ordered part and will see what happens.
    Also thanks for reply on Bosch t/d belt fitting.
    regards,
    Mike

    in reply to: w1607w leaking from soap drawer #422595
    mike100
    Participant

    Re: w1607w leaking from soap drawer

    thanks Alan. Poor design i think
    Mike

    in reply to: how to fit belt to Bosch WTE 84107GB/01 #424175
    mike100
    Participant

    Re: how to fit belt to Bosch WTE 84107GB/01

    yes, td

    in reply to: Miele w504 drum gone #422389
    mike100
    Participant

    Re: Miele w504 drum gone.

    thanks Don. Will check the rest of machine and then decide
    Mike

    in reply to: CD 601W cutting out after few mins. #419523
    mike100
    Participant

    Re: CD 601W cutting out after few mins.

    Thanks bose.Will go back and check
    Do you think the overheating cutout is one of the thermstats on the heater

    in reply to: Diplomat ADP 8132 eco light flashes #418645
    mike100
    Participant

    Re: Diplomat ADP 8132 eco light flashes

    Thanks for that Ken.
    I just replaced the control panel not the module.
    When i couldnt get it to run i took off the lower panel and saw the suppressor hanging down and it looked blown. I will check that first then move on to the pressure system.
    regards,
    Mike

    in reply to: ariston A1600wd tumble dry hose #415811
    mike100
    Participant

    Re: ariston A1600wd tumble dry hose

    Great thanks for that Jim. can now see correct part.
    regards,
    Mike

    in reply to: Maytag MAF 8805 AES and MDE 5605 AES #415429
    mike100
    Participant

    Re: Maytag MAF 8805 AES and MDE 5605 AES

    thanks, going back to get the wma nos
    Mike

    in reply to: Miele 75 dishwasher #412893
    mike100
    Participant

    Re: Miele 75 dishwasher

    ok thanks Nige. Will try that

    in reply to: cd601w no display and others #409616
    mike100
    Participant

    cd 601w leaking and no display

    Leaking from rear left and no display except on Timed Dry and Revitalise.

    How do you access the reservoir that may be blocked. Do you have to take off the back and drum out.

    Thanks,

    Mike

    in reply to: cd601w no display and others #409615
    mike100
    Participant

    Re: cd601w no display and others

    ongoing problem here.

    Leaking from left rear

    Also, there is only a display on Timed Dry and Revitalise.
    Delayed start timer works ok.
    Fitted new door catch

    Can you tell me please how to access the pump reservoir. It looks like the back has to come off and the drum taken out. Not easy i suspect

    thanks,

    Mike

    in reply to: miele g 653 scvi plus not filling #408548
    mike100
    Participant

    Re: miele g 653 scvi plus not filling

    Thanks Seamy, would appreciate that. Was about to buy aquastop hose.

    mikecolenutt@btinternet.com

    Mike

    in reply to: aeg tt520 916 014 217 00 cuts out #405398
    mike100
    Participant

    Re: aeg tt520 916 014 217 00 cuts out

    great, good answer Martin. Will check
    Mike

Viewing 15 posts - 46 through 60 (of 170 total)