[MiloFrance]

Re: Temperature light on permanently?

Tuesday my very old multimeter fell apart, so I have a new one thanks to Amazon. The impedance on the temp selector pictured is all over the place, once it gets to the ‘click of current temperature. Should it rise steadily as the knob is turned? If so, I think I have the culprit… Thank you for all the replies. Model is a Frateli Onofiori EV92MA 3.8kW total, Serial number 1104000113R

[MiloFrance]

Re: Temperature light on permanently?

My meter is giving me a tone on the element, although I’ll check a few more times.
On the temp selector knob, should there be a steady change of resistance as you turn it? This is the one fitted, with the sensor coming off the bottom on what feels like a moulded in wire.

[MiloFrance]

Re: Temperature light on permanently?

Taken the top off and the selector switch is very mechanical, nothing really to go wrong. Could it be the temp sensor itself? Or the temperature dial?
Cheers
Miles

[MiloFrance]

Re: Temperature light on permanently?

Ahh Thank you very much! So if I take the switch out, presumably I’ll find a series of contacts and a return. Test them individually to see if theres an open circuit or short where there shouldn’t be?
Miles

[MiloFrance]

Re: Gas ring sensor (thermocouple) needs replacing?

Just looked at the Terim spares, no thermocouple. 🙁

[MiloFrance]

Re: Gas ring sensor (thermocouple) needs replacing?

Thank you Don! Dave helped with this oven a couple of years ago, hopefully we can use you to get it sorted again!

Edit… might be Flash based on the green button, all I get is an unhappy face?

[Author]

Posts