Monty3

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 30, 2014 at 9:57 pm in reply to: Hoover VHD 1400 #411855
    Monty3
    Participant

    Re: Hoover VHD 1400

    Hurrah!!! Thanks Martin before I laid the machine on its side I drained it but forgot to empty softener drawer Doh! :boops: some of it must have found its way into the programmer. I dried it out and hallelujah it’s working. Missus happy 😀

    March 29, 2014 at 8:40 pm in reply to: Hoover VHD 1400 #411853
    Monty3
    Participant

    Re: Hoover VHD 1400

    Yep, have I messed up.? It was the only way I could get at the heater properly

    March 29, 2014 at 8:12 am in reply to: Hoover VHD 1400 #411851
    Monty3
    Participant

    Re: Hoover VHD 1400

    I replaced the heater because the timer saver light was flashing 5 times and not moving past the first part of the cycle. Cleaned out the pump and hose, made sure the waste pipe was clear, cleaned the inlet filter still didn’t make any difference. Now it won’t even start the lights just stay on 90 degrees sensitive and stain blaster.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)