mrhuggy

Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • February 21, 2013 at 8:59 am in reply to: Neff Single Oven hinge replacement #390468
    mrhuggy
    Participant

    Re: Neff Single Oven hinge replacement

    Yes the hinges are in the guides correctly

    May 25, 2012 at 6:29 pm in reply to: Work Up For Grabs #360243
    mrhuggy
    Participant

    Re: Work Up For Grabs

    How long does it take to get on the list of engineers? I applied a couple of months ago but not heard anything!!

    July 11, 2011 at 4:09 pm in reply to: Bosch dishwasher WAA28161GB/09 #355246
    mrhuggy
    Participant

    Re: Bosch dishwasher WAA28161GB/09

    Oops!! My mistake it is a washing machine!!

    August 4, 2009 at 10:18 am in reply to: Hotpoint wf860 #293836
    mrhuggy
    Participant

    Re: Hotpoint wf860

    MANY THANKS. I HAVE FOUND THE ANSWER THERE

    July 28, 2009 at 4:30 pm in reply to: bosch washing machine stuck showing 1 minute #293292
    mrhuggy
    Participant

    Re: bosch washing machine stuck showing 1 minute

    Many thanks for the tip. I went today and traced fault to burnt out heater spade terminal. Customer very happy,and so was I, with not having a new circuit board left on my hands!!

    July 27, 2009 at 9:41 pm in reply to: bosch washing machine stuck showing 1 minute #293290
    mrhuggy
    Participant

    Thanks for that,but would it not stick before the rinses ?

    May 28, 2009 at 8:07 am in reply to: bosch dishwasher sgs55c02gb/01 overfilling fault #287950
    mrhuggy
    Participant

    Re: bosch dishwasher sgs55c02gb/01 overfilling fault

    Many thanks for the reply. That has been a great help.

    January 5, 2009 at 11:00 pm in reply to: Diplomat ADP8322 No wash sympton #273037
    mrhuggy
    Participant

    Thanks for that

    January 5, 2009 at 9:41 pm in reply to: Diplomat ADP8322 No wash sympton #273035
    mrhuggy
    Participant

    Re: Diplomat ADP8322 No wash sympton

    lerch wrote:Blockage could be in metering tank or pressure switch failure / water in pipe if switch has dropped from correct position.

    I have not had much experience of this model,where is pressure switch located? Thanks

    January 5, 2009 at 9:39 pm in reply to: Diplomat ADP8322 No wash sympton #273034
    mrhuggy
    Participant

    Re: Diplomat ADP8322 No wash sympton

    aqualectric wrote:It’s a Whirlpool machine. One beep then abort is usually NTC failure.

    Steve. It keeps beeping have tried a ntc. Thanks

    January 5, 2009 at 9:08 pm in reply to: Diplomat ADP8322 No wash sympton #273030
    mrhuggy
    Participant

    Re: Diplomat ADP8322 No wash sympton

    lerch wrote:Open the door just when the pump kicks in to see how much water you have in. Is there water in the base causing anti-flood to start??

    If it is overfilling,what could be the cause,is there a blockage and if so where? Thanks

    December 21, 2005 at 8:44 am in reply to: creda tumble dryer Model TCR14 #158453
    mrhuggy
    Participant

    Re: creda tumble dryer Model TCR14

    iadom wrote:Don’t have that model but may have the equivalent Hotpoint model, do you know the date code, also how many connections are used on the relay 4 or 6 ?

    there are 6 connections used on relay part number 1701624,can u email asap please the wiring for this unit.
    thankyou.

    December 18, 2004 at 12:03 pm in reply to: whirlpool integrated dw adg993 #121631
    mrhuggy
    Participant

    Re: whirlpool integrated dw adg993

    I am away from the customers house now .What am I looking for if it does flash as you say ? Many thanks

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)