[muzza069]

Re: F & P GW709 not filling

I beleive I have two problems with the machine. 3 or 4 times it has intermittantly stopped stopped while draining, beeping every second or so and the lamps indicate code 62 hence the drain problem. 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time it drains fine.
When filling with the temp on hot, the machine will fill for approx 70 sec then the the hot water valve shuts off and it continues filling for 2-3 minutes with cold water untill it beeps and the cold temp lamp flashes. If I push start it continues to fill with cold water however if I change the temp down one to to hot/warm while its filling, it starts taking in warm water again. If I start a wash on cold water, it fills to 1/3 to 1/2 full (approx 2-3 min) and beeps with the cold temp lamp flashing. Is it a valve problem or possible something else like the thermistor? What tests can I do? Valves test 64ohms and appears good flow through them.

[Author]

Posts