[nancyboy]

Re: Bosch SGS6302/12

Hi Martin,

Thanks for you time and responses

Regards Nancyboy

[nancyboy]

Re: Bosch SGS6302/12

Hi Martin,

Thanks for the response, some water must have entered the machineas there was water pooling in the bottom of the machine when I opened it up, also saw water emptying out of the machine. Perhaps there is a partial blockage where you have suggested, as you say maybe its letting a Qualified Engineer to have a look at it/ orlooking for a new one?

Thanks again

[nancyboy]

Re: Bosch SGS6302/12

Hi Martin,
It was cold not steamy!

Regards

[nancyboy]

Re: Bosch SGS6302/12

Hi Martin, After posting my initial post, I pressesd the on/off button and then the eco & intensive buttons for about 3 seconds it then fired up and displayed 82 minutes remaining it then continued on its cycle without anything (even the racks) in it. It thensemed to stop on 1 minute remaining ans stayed like that. I swtched it off and had a look inside but it had not even disolved the finish tablet. There was a small pool of water left in the bottom. I only did this because I had read it somewhere on the web?.I don’t know if this is or what is the standard reset for this type of machine?

Thanks for the reply Martin, if you have any other suggestions they would be appriciated

Regards nancyboy

[Author]

Posts