Forum Replies Created
-
Posts
-
Re: Is whirlpool / hotpoint and wpro the same company
kwatt wrote:It’ll be the same thing repackaged. They won’t make several versions or buy in several versions of one component.
K.I ordered part number C00258633 which I believe is 2m long but the wpro ASG310 is 3m long.
Re: Is whirlpool / hotpoint and wpro the same company
Will a wpro universal vent hose be the same quality as a genuine hotpoint vent hose.
Re: Which way does the cold water pipe go
iadom wrote:The angled connector should go on the back of the machine, this allows the pipe to drop down from the back without being bent at right angles when the machine is pushed back.
I pulled the old machine out and I can see that you’re right about the angled connector should go on the back of the machine. The way the council put the pipe on it put’s pressure on the connector on the back of the machine when it’s pushed back.
Re: Which way does the cold water pipe go
Over the years I’ve always put the angled part on the washing machine but is there any reason why it has to go this way. The reason way I ask is because when the council did the plumbing they put the washing machine valve connector in the wrong place so they took the pipe off the machine and put the angle part on the water pipe valve connector otherwise the pipe would kink and stop the flow of water.
