nessy

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • November 11, 2025 at 7:10 pm in reply to: Heat pump tumble dryer thats decent quality please #494108
    nessy
    Participant

    Thanks Don, appreciated

    December 8, 2004 at 2:06 pm in reply to: Eurolec DW004 #120011
    nessy
    Participant

    Re: Eurolec DW004

    Hi KWatt…
    The saga continues. Can you give me an idea of price for the membrane keypad for this DW please? It looks as if that’s flakey too…! 😕

    November 30, 2004 at 8:56 pm in reply to: Eurolec DW004 #120010
    nessy
    Participant

    Re: Eurolec DW004

    Thanks again, I’ll follow this up.
    Cheers!

    November 30, 2004 at 7:36 pm in reply to: Eurolec DW004 #120008
    nessy
    Participant

    Re: Eurolec DW004

    😥
    Hi, Well no one turned up to fix the DW,didn’t even have the courtesy to call to say they wouldn’t be arriving…waited in all day.Am I just being picky, or is this service standard acceptable?

    November 24, 2004 at 5:11 pm in reply to: Eurolec DW004 #120007
    nessy
    Participant

    Re: Eurolec DW004

    An update Guys, Manufacturer agent has agreed to fix the Dw under warranty and that should happen on Friday.
    Thanks everyone who found the time to reply to me on this forum
    Cheers
    Paul

    November 22, 2004 at 12:42 pm in reply to: Eurolec DW004 #120006
    nessy
    Participant

    Re: Eurolec DW004

    Thanks for your speedy response kwatt.
    I don’t much like the price though..! I’ll try the manufacture’s sense of duty as the machine is only one month out of warranty…
    Wish me luck, otherwise I’ll get back to you regarding for some advice re a DW with a little better quality in the build.
    Thanks Again
    P.s
    What sort of card is this please? would it be fixable. I have been used to pcb repair to component level, but of course information is required about the board to start with…I suspect that may not be available.
    Paul

    November 21, 2004 at 9:07 pm in reply to: Eurolec DW004 #120003
    nessy
    Participant

    Re: Eurolec DW004

    Yes Bryan, but not in the domestic appliance field. Service manager for an international company in the printing industry until a couple of years ago.

    November 21, 2004 at 8:20 pm in reply to: Eurolec DW004 #120002
    nessy
    Participant

    Re: Eurolec DW004

    Thanks Penguin,

    I do feel o.k around industrial stuff,logic, embeded microprocessors and the like,indeed this was all I did to pay the mortgage until a couple of years ago. I’ve never had the motivation to look at a dishwasher before but have always managed to fix the washing machine.

    I’m surprised how difficult it’s proving to find out information for this offending machine and do appreciate you efforts to help.

    Do you have an idea how expensive is the card for the dw004 please,or where may be the best place to source it? I have been lokking on the net,but perhaps not in the correct place!
    Should I cut the losses and junk the dishwasher do you think?
    Thanks
    Paul

    November 21, 2004 at 12:34 pm in reply to: Eurolec DW004 #119999
    nessy
    Participant

    Re: Eurolec DW004

    Thanks Bryan & co . All I have to do now then is buy the pcb and decide how to get the covers off….any ideas will be appreciated.
    I ‘ve been in tech support for donkey’s, but have never had the pleasure of a dishwasher….
    Paul

    November 20, 2004 at 8:52 pm in reply to: Eurolec DW004 #119995
    nessy
    Participant

    Re: Eurolec DW004

    Thanks, I’ll start a pending file for the dirty plates….

    November 20, 2004 at 8:23 pm in reply to: Eurolec DW004 #119993
    nessy
    Participant

    Re: Eurolec DW004

    Thanks Dave …I love a sense of humour
    Details from door:
    Essentials Range. Dw004
    Ser No: 030608757
    Type: DW 24E1
    COD; 90647 1589
    NIF ESF 2002 0517
    Thanks,I look forward to putting the fairy back into the cupbord !
    Paul

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)