[nh]

Re: Hygena Model 8702 Not Spinning

K.
Thanks for the info, never considered the capacitor.
Wife needs machine back asap so what would be the quickest option, ordering parts or a service visit?

Yes the post code area is PA6.

I think my wife will call Craig this morning.

Thanks again
nh

[nh]

Dave/Clive thanks for the info.
I checked for blockage to the pressure switch, blew through tube and it was clear. Tried wash cycle again and this time machine overfilled. Wife got kitchen floor washed. Eventually managed to set pressure switch by draining all water out of machine reconnecting tube to pressure switch then filling to normal ‘sump’ level. Started cycle and machine completed full cycle. It has now done a couple of full wahes and is cleaning better than it has done for months. Once again thanks for the help, I was struggling until you pointed me in the right direction.

Neil

[nh]

Thanks for the info. I found the circuit diagram, not easy to locate as it was folded up to the size of a postage stamp.
I take it the water level is controlled by the pressure switch?
The circuit refers to a water valve, a regeneration valve and a rinsing valve, I can probably workout what these are but not sure about regeneration.

[Author]

Posts