nicenswift

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Candy GCC591NB Will Not Turn #465992
    nicenswift
    Participant

    electrofix wrote:capacitor is likely
    if the capacitor goes the motor has less power. it will go with a push and may work with light loads

    its a bit odd that you say it works for a full cycle after you have turned the drum

    its a bit of a pig to get at and change on this model

    Dave

    Hi Dave,

    Many thanks for the advice.

    Do you know roughly where it is and is it a total strip down.

    Many thanks

    Andrew

    in reply to: Problem with Baumatic B180ss Fan Oven #425153
    nicenswift
    Participant

    Re: Problem with Baumatic B180ss Fan Oven

    Hi,

    Just like to say oven is now fixed and many thanks to all who gave good advice.

    The problem was the selector on the left hand side had burned out and had to be replaced.

    It was a friend who is an electrician that spotted it and I picked up the part from ebay for 14.99.

    😀

    Again many thanks

    in reply to: Problem with Baumatic B180ss Fan Oven #425151
    nicenswift
    Participant

    Re: Problem with Baumatic B180ss Fan Oven

    Hi,

    I have checked the clock and it has the U with 3 lines above.

    Do these oven have such a thing as an internal fuse that could have blown ?

    Reason I ask is that the inside light will not even come on when just this is selected ?

    Many thanks to everyone so far for great advice.

    in reply to: Problem with Baumatic B180ss Fan Oven #425148
    nicenswift
    Participant

    Re: Problem with Baumatic BS180ss Fan Oven

    Thanks for the advice.

    Would you say it is worth getting someone out or is it time for a new one.

    The oven is over 5 years old

Viewing 4 posts - 1 through 4 (of 4 total)