[NigeS]

Re: AEG Dishwasher F55002 911436014

Just to clarify – its as if the module resets itself after a couple of minutes. I’m guessing earth fault on pump/heater. Has anyone come across this before on AEG/ZANUSSI dishwashers?

[NigeS]

Re: Vestel ISE5 e08

Thanks for the advice. Will see if I can get a board as the motor tests ok for earth leaks. 🙂

[NigeS]

Re: ISE10 1606W stops intermittently

Thanks Ken – will try that and report back

[NigeS]

Re: ISE CD601W Low heat

I checked everything mentioned with no luck.
It turned out to be a burnt out relay on the fascia (main) board
All is now well!

[NigeS]

Just a quick note to say thanks to UKWG for the detergent training – it was, as promised useful & informative. It even managed to hold our attention, after a hard day at the office. I still cant convince my missus about the uv whitening affect of the new aerial powder though! Best send her on it..

We’d definately attend any similar training courses you might be thinking of running.

Thank again – Nige,Karl & Derek at Caseco in Harrogate

[Author]

Posts