Forum Replies Created
-
Posts
-
I’ve always gone for hotpoint ultima 8-9kg, now have a s-line 10 kg, both are extremly quiet and 1600 spin which is brilliant, only downside I would say is programme times on the s-line are very long, talking to others with 10kg machines they say the same
Thanks guys, Kaibart,, fan is new and working, Dave, I’m using the fan oven feature, I know there’s a element underneath, I’ll certainly have a look at it,, I tried to take a picture of the model number but it’s to big to upload apparently ..
Only difference is it’s off a 8 kg, mines a 10 kg wash. Otherwise the same machine, I’m thinking as it only tells the module what to do, it should work ?
if it wasn’t for the fact it’s only 2 yrs old I would of scrapped it,,
do you have any idea roughly what they charge to re programme the boardHi Dave, found a replacement on eBay for £30, does that sound about right,, all the numbers the same, except serial number ( obviously that would be different ),, I’m getting ear hole treatment now as it’s in the kitchen,,
Trying to take the top pub out, it seems to be attached to the programme knob, is it just pull or something else holding it ?
That’s who repaired the module,, I’ll give them a shout after I’ve double checked everything,, bad arthritis day today, so not gonna happen
I wouldn’t have a clue as to where to send to have it repaired if it is that, I’ll recheck all connections and get back to you,, thanks for your help
I’m thinking the bit where the cable comes in, I’ll check all connections, it had f12 then went dead, I sent board off to a place I’ve used any time I’ve needed,, so I’m sure that’s ok,,
Cheers Dave, I laid it on its side and found it,, next problem is it’s still dead, I’m wondering if it’s popped the power supply box ,, think I have a spare luckily
