[nolights]

Re: Zanussi zx99/5si

hi
Has anyone got an old main pcb , i am trying to repair my pcb i need to now the componet TH3 , which is near the ribbon connector or can you send me the old pcb if this part is still intact i will pay postage costs,

[nolights]

Re: Zanussi zx99/5si

it looks like th3 has blown apart on the pcb this is surface mount , i cannot identify the component as not enough left of it ,
so it seems like a new pcb OUCH

[nolights]

Re: Zanussi zx99/5si

many thanks , will have a look over the weekend

[nolights]

Re: Zanussi zx99/5si

I have taken the pcb out, checked the magnetic reed switch that works on it turns the dial lighting off and on , looking at the pcb the power tracks for the interior lights go fron the connector on the righthand side of the pcb to the left via two link wires across the pcb to the large connector on the pcb , which then goes off into the top of the fridge via a ribbon cable . the voltagew across the two link wires is 53v ac . any ideas where the ribbon cable goes too . Has anyone got a circuit diagram for this beast please.

regards

nolights ..paul

[nolights]

Re: Zanussi zx99/5si

many thanks for the reply , i will have a look and update everyone

paul

[Author]

Posts