normcatalunya

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: Thermostat advice please #396105
    normcatalunya
    Participant

    Re: Thermostat advice please

    freezer plate..

    in reply to: Thermostat advice please #396104
    normcatalunya
    Participant

    Re: Thermostat advice please

    Just for the record this is the original.. just 2 connections,so thought I could not go wrong 🙁 Is it still possible to buy?Thanks..Norm 😀

    in reply to: Thermostat advice please #396103
    normcatalunya
    Participant

    Re: Thermostat advice please

    Accept that ..but the existing thermostat bares no resemblance connection wise to the original .

    in reply to: Thermostat advice please #396100
    normcatalunya
    Participant

    Re: Thermostat advice please

    Thanks for that Bob..Tried this..freezer did not run .It had been running constantly for a while so was really cold..but after reconnecting as per your post ..no running until things started to get soft inside….warming up thermo -couple by removing from freezer immediately operated thermostat?Will try to measure some temps..Norm

    in reply to: Thermostat advice please #396098
    normcatalunya
    Participant

    Re: Thermostat advice please

    well tried pins 6 and 4 ..freezer runs but does not switch off?
    Any suggestions please?

    in reply to: Thermostat advice please #396097
    normcatalunya
    Participant

    Re: Thermostat advice please

    Nada!

    in reply to: Thermostat advice please #396095
    normcatalunya
    Participant

    Re: Thermostat advice please

    Now ready to fit a VS5 ..Can you please tell me which pair of connections I need to use please..They are # 4,6 and 3..Thanks..

    in reply to: Thermostat advice please #396094
    normcatalunya
    Participant

    Re: Thermostat advice please

    Thanks for that!

Viewing 8 posts - 1 through 8 (of 8 total)