[ollski]

Re: bosch integrated 9000405865 en 640EV flashing brush or t

I’ve cleaned the filter to no avail, but yesterday I removed the waste pipe from the macerator connection and ran it into a bucket and it completed 2 washes although the fill noise sounded different to normal. The waste was clean so I’m not sure why the difference or maybe just coincidence.

[ollski]

Re: bosch integrated 9000405865 en 640EV flashing brush or t

sorry, took the number off the manual, on the data badge its a SMV50E00GB / 16

[ollski]

Re: bosch integrated 9000405865 en 640EV flashing brush or t

No ideas?it seems to be driving a pump but no water supply, is there any way to bypass this pressure device at the water inlet hose?

[ollski]

Re: Hotpoint aqualtis AQGD169 not spinning

British gas changed the motor, pcb and code plug. All good.

[ollski]

Re: Hotpoint aqualtis AQGD169 not spinning

Well its been unplugged for 5 years 😆 All the connections seem good and tight with no damage and the display module was replaced shortly before it went to storage. all the indicators on that seem to be working ok. Ive tried it on just a spin cycle but it makes noises and the drum motor doesnt turn.

[ollski]

Re: Hotpoint aqualtis AQGD169 not spinning

Ah that makes more sense. Are there any continuity tests I can carry out on the motor to check it?. I’m guessing it switches on the neutrals as its showing a permanent live feed with a demand at display

[ollski]

Re: Hotpoint aqualtis AQGD169 not spinning

It shows in the display as F18 and then a line of text in the display about a blockage. I will run it tomorrow and try to get a pic.

[Author]

Posts