[onecallpaul]

Re: hotpoint rla34p

Thanks mate new fridge then!

[onecallpaul]

Re: Hoover 5036 module

Once I,d repaired the board I filled it up and put it on spin and it functioned normally,there was no signs of a leak and I like you thought if the connectors were wrong nothing would happen or maybe the board or fuse would blow. Well I’m going there at 9 so I’ll post what I find Cheers Paul

[onecallpaul]

Re: Hoover 5036 module

Hi mate, there are three connectors one small two large, I wondered what the outcome would be if the twolarge ones were reversed. I soldered a dry joint and stupidly didn’t mark the connectors thinking they would only fit one way , the machine seemed to be working fine but was called back because it was tripping rcd on spin. I tested the motor and the comm was leaking to earth changed the motor and got another call saying same problem I just wondered if I fitted the module connectors wrong what would happen?

[onecallpaul]

Re: bosch wvf2401

Cheers boys its also nicked the temperature regulator probe so I feel a bit more confident about ordering that. By the way Paul I’m a big Chelsea fan.

[onecallpaul]

Re: servis m9503s-1

Thanks mate will do

[onecallpaul]

Re: hotpoint ffa97

Cheers mate if there is one its not obvious.

[onecallpaul]

Re: bauknecht wa9430

Cheers Paul

[onecallpaul]

Re: Hotpoint wf740

Cheers mate

[onecallpaul]

Re: zanussi dryer tce7127w

Is Penguin about?He posted to someones mail box an answer to the same question cheers Paul

[onecallpaul]

Re: zanussi dryer tce7127w

There are 2 capacitors, changed both, and a relay definateley no power to motor cheers

[onecallpaul]

Re: hoover hnd6515

Cheers guys it may be the facia itself complete then

[onecallpaul]

Re: miele t454 dryer

Thanks Tim will have a go.

[onecallpaul]

Re: widl 126 f15

Thanks Mike much appreciated.

[onecallpaul]

Re: candy cdf 622 element

Thanks Chris, is it easy to fit?

[onecallpaul]

Re: teka hm595

CHEERS

[Author]

Posts