Forum Replies Created
-
Posts
-
Re: Bosch WAE2416sgb fitted new brushes now wont start, help
hello again, thanks everyone for your help.Ii have now fixed the problem. it was just a reset problem Lastys solution was the correct one unfortunately when i first turned the knob to 6oclock i should of waited for two flashes of the lights then moved it to 7 oclock, then release th spin button and turn to off, this instantly reset the machine. One again thanks for all the suggestions.
Re: Bosch WAE2416sgb fitted new brushes now wont start, help
i have disconnected the motor plug and tried the reset and then connected the motor plug back in but still no change. Iam at the point of giving up and buying a new machine(not an option i will take lightly) I have an engineer coming out this afternoon at a cost of £25, i dont really know what else to do
Re: Bosch WAE2416sgb fitted new brushes now wont start, help
hi martin thanks for the advice but im just vwiondering does this work with the touch sensitive buttons, as when i hold the spin button there is no button as such to hold in, sorry if im being really dumb here.
Re: Bosch WAE2416sgb fitted new brushes now wont start, help
hi ive tried that and it doesnt seem to work anyone have any other ideas?
Re: Bosch WAE2416sgb fitted new brushes now wont start, help
Hi Lasty just a quick question
does this work with touch sensitive buttons?Re: Bosch WAE2416sgb fitted new brushes now wont start, help
lasty wrote:hi,if you turn wash knob to the off position then turn it to the 6 oclock spin position then press and hold the spin speed button then turn the knob to the 7 oclock position keep holding down the spin speed button for a further 5 seconds then turn the knob to the off position,this will reset the board, however it can take a few times to reset it when you have not done it before,hope this helps
THANKS i will try that now.
