[PandfA3]

Dave. Thanks for trying to help.
The part number for the control board came from the original one I took out (the original part) and the one I bought has got identical numbers. Albeit, those are the numbers on the labels on the casings, so not necessarily a NEFF part number. Will look up Neff part number tomorrow.
Cheers

[PandfA3]

Siemens
EPG55150
9000202667

[PandfA3]

Thanks for comment Dave.

Just done complete strip of door and sides and disconnected and tested every wire… no problems.

Door switch also works fine…

Only thing I can think to do next is complete removal of base and test every other wire?

Any other ideas?… anyone??
Full Enr is S54T09X1GB/21
Have replaced Drain pump and Main Control Board. (the one in base bottom right hand side, as it’s the one that ‘feeds’ the drain pump.)
Also checked operation of the float switch contacts, and pressure switch contacts.
I knew the drain pump wasn’t getting voltage, so didn’t suspect it was the problem, but I broke one of the terminals while trying to get the spade connector off, so thought I might as well get a new one anyway.
Starting to regret not just buying a new machine!. but now I’m in, I’m not letting it beat me!!

I’ve had this machine apart a few times previously, mostly due to clogged tubes. Every time I have had the left side panel off, the float switch mechanism activates the drain pump….This time it doesn’t, hence my suspicion of wiring/controls.

any comments appreciated..
cheers
Paul

[Author]

Posts