UK Whitegoods

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
November 21, 2022 at 5:26 pm in reply to: E10 error on John Lewis washing machine during drying cycle #440449

Paul sparky
Participant

So having pulled machine out I retested the solenoids and found centre one was faulty.
so ordered replacement and fitted
tested and drier now working

November 1, 2022 at 10:05 am in reply to: E10 error on John Lewis washing machine during drying cycle #440448

Paul sparky
Participant

Ok thanks, time to pull the machine out and look further

November 1, 2022 at 7:56 am in reply to: E10 error on John Lewis washing machine during drying cycle #440446

Paul sparky
Participant

Hi Dave

all 3 go to the soap draw,, and I can’t see any pipes going to the metal condenser

Paul

October 31, 2022 at 9:23 am in reply to: E10 error on John Lewis washing machine during drying cycle #440444

Paul sparky
Participant

Hi

Which of the 3 valves is for the drying cycle?
is it possible to remove/inspect or swap with another as we don’t use the soap draw

October 30, 2022 at 10:16 am in reply to: E10 error on John Lewis washing machine during drying cycle #440442

Paul sparky
Participant

Hi Dave

its a JLWD1613, prod no 914605613 00, Type FL10664M2

I have measured the 3 coils and they all read the same

Paul

October 29, 2022 at 3:46 pm in reply to: E10 error on John Lewis washing machine during drying cycle #440440

Paul sparky
Participant

Hi. I am having the same issue, so having removed the lid I can see the water inlet has 3 solenoids but all 3 go to the soap draw(wash compartment, pre wash compartment and stain compartment). I can’t see any pipes connected to the condenser. Is it still likely to be a faulty inter valve?
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)