Forum Replies Created
-
Posts
-
Re: John Lewis Washer Dryer 1612
Light is on all the time.
I managed to get it to service mode, when I get to position C10 I get message EHE, the same was for C11,C12, C13, C14, C15 and C16. When I switch it off and on it displayed ELE I couldn’t do anything so I switch it off and on and it went to service mode again. This time EHE appear just at C5 and C6.
After that I switch it off and on again and it worked fine once. after that it was going in to the same problem as previously – displaying one.I checked all cables and connections everything looks fine nothing loose. Is it possible it is something wrong with the main board even if it sometimes works without any problems?
Re: John Lewis Washer Dryer 1612
only light above start button is flashing red but I don’t remember is it all the time or not. I will have a look later.
Thank you Dave, I will try to check that fault code once I’m at home.
Re: John Lewis Washer Dryer 1612
It shows 1 and then starting to pump out the water. But after pumping water out it is stuck and do nothing (display 1 all the time). I need to open the doors by puling emergency opening think.
If I live it alone for about a week it will work totally fine but just once and then if I try to use it again it will straight go to 1.Re: John Lewis Washer Dryer 1612
I all ready replace door lock. It looks like it is stick on 1 minute. The oddest think is whichever option I choose and pres start it is showing 1 minute straight a way and machine is pumping out the water. Is there anything else I can do or check?
