Forum Replies Created
-
Posts
-
Re: Fisher & Paykel error codes
I found error codes here; http://www.docstoc.com/docs/25379715/?u … ign=newreg
37 Pump blocked error. The pump seems to be fine until about 70{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the water has been pumped out (beautifully with good pressure). Must be another sensor. Could the pump be overheating? Any help would be appreciated.
I have a GW712. When it gets to the end of the wash cycle pump starts, but it does not empty completely and will not go on to the refill and rinse cycle. I can coax it along turning it on and off a few times and eventually it will get going but will stop again at end of rinse before it spins. Again the machine will not empty properly and wont spin. With a lot of mucking about I have managed to finally get it going to complete the spin, but next wash its the same story over again. When it stops lights 1 3 6 are lit (right to left) 1 + 4 + 32 = 37
Help would be much appreciated Thanks
