[paulwdouglas]

Re: Hotpoint Ultima Extra Wma64. Drum Not Turning E32 Fault

Got a new set of brushes and its back up and running.

Thanks for the help.

[paulwdouglas]

Re: Hotpoint Ultima Extra Wma64. Drum Not Turning E32 Fault

Thanks Guys.

Just had a good look at the brushes. One is longer than the other and the smallest one is only shiny across about a third of the surface.

I will get a new set. Whats the best way to clean up the commutator.

[paulwdouglas]

Re: Hotpoint Ultima Extra Wma64. Drum Not Turning E32 Fault

Got the motor out, the brushes are worn down a lot(about 5mm left) but still in contact (resistance measured at the connector block is 4 Ohms). The motor moves freely.
Anything else to look for or do you think its the brushes?

[Author]

Posts