Payney

Forum Replies Created

Viewing 11 posts - 31 through 41 (of 41 total)
1 2 3
  • Author
    Posts
  • April 9, 2010 at 4:42 pm in reply to: Smeg SE378MFX5 #317447
    Payney
    Participant

    Re: Smeg SE378MFX5

    Thanks. Is that a replacement as it looks different.

    April 9, 2010 at 7:38 am in reply to: Smeg SE378MFX5 #317445
    Payney
    Participant

    Re: Smeg SE378MFX5

    Still need some help finding this part number if anyone can help. 🙂

    March 31, 2010 at 7:23 pm in reply to: CDA CI592WH #316846
    Payney
    Participant

    Re: CDA CI592WH

    Thanks 🙂

    March 31, 2010 at 9:46 am in reply to: whirlpool integrated washer #316777
    Payney
    Participant

    Re: whirlpool integrated washer

    Do you have the 12nc model number for it?

    March 31, 2010 at 9:31 am in reply to: CDA CI592WH #316844
    Payney
    Participant

    Re: CDA CI592WH

    The dryer knob fits into a disc that then fits onto the timer. Its the disc that has the D shape that fits onto the timer spindle .

    I have found 1 but not sure the part number is correct as it is on a web site and they have most likely used there own part number.Tried to order 1 from them but they have no stock.

    The link with picture is http://www.cgdomestics.co.uk/index.asp? … artId=1147

    Thanks.

    March 30, 2010 at 5:33 pm in reply to: whirlpool integrated washer #316774
    Payney
    Participant

    Re: whirlpool integrated washer

    E02 will be a water leakage or float switch activated.

    February 3, 2010 at 8:56 am in reply to: Indesit WIXL143UK #310684
    Payney
    Participant

    Re: Indesit WIXL143UK

    Thanks guys.
    A lot cheaper option that way.

    November 13, 2009 at 12:45 pm in reply to: Whirlpool S20DRWW30 #302801
    Payney
    Participant

    Re: Whirlpool S20DRWW30

    What you have read about changing both boards is probably not going to apply here as the serial no. you have given means it was made after week 30 of 2004 and its only the models before this date that had a software conflict.
    If its freezing and then stops I would personaly check the defrost heater and connections to the defrost heater which somtimes expand.
    Hope this helps.

    October 5, 2009 at 4:33 pm in reply to: Whirlpool S20DRSB33-A/G #298687
    Payney
    Participant

    Re: Whirlpool S20DRSB33-A/G

    Are you talking about the flap that covers the ice dispenser chute.
    If so this can be bought as a kit. Pt. no. 481244069307 for about 10 pound.

    September 10, 2009 at 10:23 am in reply to: whirlpool AKZ451 oven #296735
    Payney
    Participant

    Re: whirlpool AKZ451 oven

    Its normaly the push button micro switch in the middle of the facia thats gone. Make sure the selector knob is set to 0 when you test it or it will not work.

    Mark

    July 29, 2009 at 9:38 am in reply to: whirlpool AWO/D 4505 wont spin #293363
    Payney
    Participant

    Re: whirlpool AWO/D 4505 wont spin

    This sounds like there is a problem with the tacho on the motor. Could need replacing. If you are looking yourself make sure you are safe and always unplug while checking.
    Hope this helps.

  • Author
    Posts
Viewing 11 posts - 31 through 41 (of 41 total)
1 2 3