[Pemo]

Re: Clearing fault code from display. Siemens S16.79 WM16S7

Hi all,

I’ve just turned dial to 6 o’clock held temp minus button for 2 secs then turned dial to seven o’clock and released temp minus button.
The result was an engineers menu. Scrolling through this with the options up / down button gave a motor inactive option, the start button was flashing so I pressed it…The motor spins at set speed and performs a self test. You have to stop motor using start button.
I turned dial to 12 o’clock waited a couple of minutes and switched on, the fault code was gone.
Thanks to all for help and suggestions.

Paul

[Pemo]

Re: Clearing fault code from display. Siemens S16.79 WM16S7

Hi Simon,

I’ve just double checked to make sure the motor plug is connected fully to the motor, I did remove the motor to replace the brushes. I just can’t reset the fault code to try the machine.

Thanks
Paul

[Author]

Posts