Forum Replies Created
-
Posts
-
Re: Bosch built-in oven – what have I done wrong?
You’ve most likely blown the selector switch fo the oven.
All access is by removing external panels, so oven out of housing.
Temperature limiter should read virtually zero ohms as it is normally closed circuit.
Stay safe – power off.
Penguin45.
Re: Hoover softwave auto-washer 1000
The lock is a double action one. It uses pneumatic pressure to hold the door shut during the wash and a collapsible motion sensor on the pulley wheel connected by a cable to the lock for the spin sequences.
Blocked air hose will hold the door shut. Cable stretching will allow excess travel to the motion sensor and the door will not open. The lever mechanism behind the button bends and doesn’t provide enough travel to pull the spring.
Penguin45.
Re: Baumatic BDW13 – thermal cutout operated, reasons?
Oh yes……
Put ‘chinese AND dishwasher’ into search for this Forum and prepare to be amazed.
Penguin45.
Re: HYGENA ADP4830
AW Services or Masterpart probably your best bet; or ask Dave_Conway nicely. 😀
Chris.
Re: Wirlpool AWZ650 condenser dryer ratting noise
To access the fans, you need to remove the drum through the back of the machine, thus revealing the covers.
spares@ukwhitegoods.co.uk will be able to supply replacements if required.
Penguin45.
Re: Baumatic BDW13 – thermal cutout operated, reasons?
Start capacitor need replacing. That’s the cylinder on the side of the pump, make a note of its uf value and match from the list HERE.
Once it gets to regular circulation you can get to deal with the leaks….
Sorry, poor qaulity Midea-built Chinese machine.
Penguin45.
Re: whirlpool adg7550 problem
Better have a read of THIS. Humming noise may well indicate a failed circulation pump.
Penguin45.
Re: Diplomat Cooker ADP3262 Oven Door Front Glass Required?
300150457 – ADP3262
300150479 – ADP3263
300300468 – ADP3700 – obsolete.Chris.
Re: Zanussi ZT 685 – water not draining
Reversing motor. If you are certain that the machine is not blocked and that any coupling to the sink is clear, the impellor stack on the motor may well be damaged. Replacement is HERE.
Motor is easily removed from the rear by removing a locking bar.
Power off first.
Penguin45.
Re: Bosch dishwasher not cleaning
Nelly, start with the basics and put up the model number of your appliance and a brief outline of your problem.
The forum is quite dynamic, so without posting a link to the thread you’re refering to, we haven’t much chance of helping you.
Most modern Bosch machine’s lids are retained by two latches at the rear – lift the latch and push the lid back. A fair amount of force may be required.
Penguin45.
Re: Indesit WIL123S Fault
Water level control is not working – level not detected in the time allowed. Pressure switch may be faulty, air hose may be holed or the air bell in the bottom hose may be clogged.
Power off if you intend to sort this yourself.
Penguin45.
