[pennychew99]

Re: Winterhalter GS660 switches on with P27 in the display

Also now I come to think of it when I was going through the parameters it scrolled back to p00 by itself a couple of times so you may be on the money with one of the buttons being partially pressed by the frame or the facia

[pennychew99]

Re: Winterhalter GS660 switches on with P27 in the display

Thanks for that Barrie, I have parameter 27 set at 1 as it has the esp 166 detergent pump.
The parameter sheet I have does look like if you press the two right buttons together then switch the machine on it goes direct to p27.

I was only on site for a couple of hours but it seemed to fill inbetween washes ok when I was there. Also it won’t start when the water level is low so over the phone I asked the guys to top it up with the hose and they said they heard ta clunk (heating contactor pulling in I presume)and then it would wash which suggests the pressure switch is ok.
I I need to go back and try actuating the drain pump then seeing if the readout drops (just read about this on the parameter/fault code sheet!)

[Author]

Posts