Forum Replies Created
-
Posts
-
Re: rangemaster 110
have taken the fan off but there are no screw heads
you can see the thread end of the screws sticking out
so screw heads are on other side and so the whole back must have to come off i presumeRe: indesit pt/no
fraid not
found that part on connections and picture shows no drawer front
but thanks for lookingRe: easi-rent
could be interested but not interested in going to wiltshire every fortnight
(thats a long way to go twice a month)Re: Whirlpool W120 Washing Machine Drum Not Moving
take the motor off and check the brushes
they are in plastic holders and shouldn`t be much more than £10 to £15Re: Zanussi Washer/Dryer ZJE1285
its normally 1100 spin and above that need that kit and the seal supplied in the kit has always been the right one
Re: Zanussi Washer/Dryer ZJE1285
the only 2 bearing kits i have ever fitted on a zanussi is
hpt w/m kit
or
brg942260 from connect
hope that helpsRe: hotpoint ff65
i presume if i do the test and the led flashes it meens the yellow thermister is faulty then 😳
Re: Whirlpool ADG957, drain only (NTC replaced)
if the machine has a solid bottom
take the bottom plinth at the front off
check if the base is full of water
if it is get rid of water and try machine watching for where the leak is coming from
UNPLUG MACHINE BEFORE REMOVING ANY PANEL :zap: 🙁Re: Candy CD474-Dial sticking-Water Leaking (NOT ELEMENT)
comet have a silver bosch d/w model sgs56e18gb for £343.97 when purchased on line or £429.99 in store
hope that helps 😀
