Forum Replies Created
-
Posts
-
Re: Creda (17049) not washing clothes!
UNPLUG MACHINE :zap:
you will then see the motor and brushes (see link supplied by iadom)
if the carbon sticking out of the holder is less than 10mm
it is probably them at faultRe: Service Millenium M3510s Ecocare
my company give 6 months on parts and labour
but i would think it would be done cheap as a good will gesture
if its not still under gauranteeRe: Service Millenium M3510s Ecocare
price about right for bearings and shaft
they are rubbish so every chance the bearings have gone again
very unlucky if the shaft is damaged again
most likely just bearings
so should be a bit cheaper than last timeRe: miele t/dryer novatronic t454
come on guys
there must be someone out there who knows miele part numbersRe: Grill not working – repair or replace??
it is quite possible the repair wouldn`t be too exspensive
element or stat
go on the repairs@ link on this siteRe: Hoover Junior 1346 bearing problems?
if i remember correctly from way back when i used to recon them i would leave them submerged in 3in1 oil overnight and never had a problem
Re: New 07 Reg.
placed my first order for an ise5 but am a bit confused about all this talk of 1×5 and 5×5 i thought they all had 5 years pts and lab???
Re: wma tub
i normally charge £120 for wma bearings
people are happy for me to do it as they don`t want to wait 2 weeks for the sake of £30Re: Hotpoint VTD20G dryer – scraping noise
click the bottom of your last post and you will be able to order one
to replace you just straighten one end of the wire (makes an s shape when looking at the photo you posted) then pull it out
the part will then prise off
PLUG OUT
