[peterirving1]

Fault found – blockage of duct providing air to fan. Now washer and dryer both working as normal – many thanks.

Peter

[peterirving1]

Penguin45

Thanks for your reply.

The E no is V4280G1GB/01, the model No is given on the Neff web site for that E No.

I’m hoping that it is fixable (Engineer coming to look at dryer part – see http://www.ukwhitegoods.co.uk/modules.p … ic&t=19115), the advice is just in case it cannot be sorted (it is a case of being prepared!).

Regards

Peter

[peterirving1]

gegsy wrote:
It may look ok but a test with a multimeter will confirm.
Off the top of my head I would expect a reading anywhere from 20-30 ohms

Greg

Greg

Beginning to look complex for a layman. Definitely worth an Engineer to look at it.

Peter

[peterirving1]

Greg – many thanks.

The replaced item was Part No 032604 “limiter-temperature” which has a red reset button – unfortunately made no difference.

The dryer fan appears to be working OK and the heater looks intact.

I will try stripping down the dryer manifold (first disconnecting the power!) and remove any blockage – if I have any difficulty with this I will get an Engineer to do it.

Regards

Peter

[peterirving1]

Should have added that it is E No V4280G1GB/01 and model No GD5062.11, if they help.

[Author]

Posts