[petescott2]

Re: bush dishwasher wqp12-9348 my dishwasher will not empty

sorted it, we’d reattached the float switch incorrectly, so it was permanently on.
All work now, thanks for all the advice

[petescott2]

Re: bush dishwasher wqp12-9348 my dishwasher will not empty

Replaced the pump, and its working, because if I tip water in the dishwasher, and shut the door, it draws the water out. But Dishwasher is displaying an E4 error and beeping. Will not allow me to select a program.
Manual says E4 error is “too much inlet water” not sure how “too much” inlet water is possible. any suggestions???

[petescott2]

Re: bush dishwasher wqp12-9348 my dishwasher will not empty

Thanks for all the info, looks like that’s what I’ll be spending my Saturday morning doing.

[petescott2]

Re: bush dishwasher wqp12-9348 my dishwasher will not empty

that was sort of my original question. can anyone confirm how to get at the pump on this model of dishwasher. I can obviously see the outlet from inside the dishwasher.
But am hoping to confirm if I need to access the bottom of the machine to get at it. or if it should be able to accessed from the front.
I appreciate your replies, I just need to know how to access the pump. I can’t check any of your suggestions until I can get at it.
Thanks

[petescott2]

Re: bush dishwasher wqp12-9348 my dishwasher will not empty

How would I remove said piece of glass or crockery? it doesn’t sound like the pump is trying to work.
I have already ordered the new pump as it was only 28 quid and I need to get it up and running again.
Do you know how I would establish how to access the pump?

[Author]

Posts