PeteW1959

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 11, 2011 at 7:35 am in reply to: Indesit W123 not doing anything! #360583
    PeteW1959
    Participant

    Re: Indesit W123 not doing anything!

    I have the CESET motor. Have emailed as suggested. Thanks for your help.

    October 10, 2011 at 10:16 am in reply to: Indesit W123 not doing anything! #360575
    PeteW1959
    Participant

    Re: Indesit W123 not doing anything!

    Thanks a lot guys, that did the trick.

    Sorry for the delayed reply but it took ages for the new brushes to arrive.

    June 4, 2010 at 8:33 pm in reply to: Indesit W123 stuck in cycle #321540
    PeteW1959
    Participant

    Re: Indesit W123 stuck in cycle

    It has finally managed to produce an error code, so hopefully that will point to the problem.

    Error code is 7. I’ve searched the forum but it would seem that no one else has had the same code!

    June 4, 2010 at 7:11 am in reply to: Indesit W123 stuck in cycle #321538
    PeteW1959
    Participant

    Re: Indesit W123 stuck in cycle

    It is connected to the sink waste pipe, through a proper connection on the trap. There are no kinks or blockages either.

    June 3, 2010 at 5:58 pm in reply to: Indesit W123 stuck in cycle #321536
    PeteW1959
    Participant

    Re: Indesit W123 stuck in cycle

    It can stick almost anywhere, but usually during wash or rinse.

    There is no particular action, it carries on with whatever it was doing e.g. rotaing drum, or maybe emptying but sometimes it is doing absolutely nothing.

    There are no error flashes either.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)