[pi3141592]

Re: Blocked Matrix? on a Siemens SN26M890GB

Hi All, I had the a similar problem. E14 – Error 14. On my Simens dishwasher. I managed to fix it by soldering on a new reed switch onto the flow meter. Its integrated to the matrix so can’t just replace the whole flow sensor. I don’t know what spec of the one that was in the machine but I had one lying about – so I used it and its working ok so far with no problems. The part number I used was – 229-3658 from RS.
It’s cheaper than replacing the matrix at 100 quid.
Hope this helps someone.

[Author]

Posts